Mil-Std-1553b Avionics Products

	compactPCI/PXI bus compatible
	3U size, single slot
	DDC controller based
	Programmable as Bus Controller or Remote Terminal or Monitor Terminal
	Up to 4 Dual Redundant MIL-STD-1553B channels
	31 Remote Terminal Control
	Direct or Transformer Coupled
	Driver support for Windows XP, Windows 7 and Linux
	Rear I/O option available

The AT-cPCI-1553 card provides a flexible, Single function, dual redundant MIL-STD-1553B interface to the CPC/PXI backplanes. It provides the highest level of performance & flexibility for MIL-STD-1553B protocol on the CPC/PXI bus. The card comes integrated with a powerful software that reduces application development time. All data bus functionality is supported by our advanced API (Application Programming Interface).

Hardware

The AT-cPCI-1553 single function architecture can emulate as a Bus Controller or 31 Remote Terminal or Monitor Terminal modes. Polling and interrupt generation is also provided. Rear I/O connectivity option via J2 connector can be provided on CPC backplane. If rear IO connector is used in the card, it has to be used in PXI backplane only. User should take caution.

Transformer and Direct Coupling

The card can be configured to work either in the transformer-coupled mode or in the direct-coupled mode. A jumper is provided on the card to select the mode. It is configured to work in the transformer-coupled mode by default.

Software

The AT-cPCI-1553 software includes :

> Drivers & APIs

> Bus Monitor

Drivers & APIs

The card comes with a powerful set of library functions to access the entire MIL-STD-1553B functionality. The drivers are designed in a modular fashion consisting of component functions and application functions. The user’s test program can be developed with few calls to the driver by using the set of application functions provided. Driver and high-level API libraries for Windows XP, Windows 7 and Linux are available. LabVIEW support is also provided. Sample programs for BC, RT, MT modes are included.

Bus Monitor

The Bus monitor software module enables effective monitoring of dataflow on the 1553 bus. All events taking place on the 1553 bus are dynamically captured. This data can be recorded and replayed enabling offline analysis.

	Record and Replay of data
	Replay with rate selection
	Message identifier
	Message sampling option
	Dynamic data updation
	Busload Analyzer
	Bus Ideal Time Analyzer
	Multi console at a time
	Filtering option up to sub address

MIL-STD-1553B Interface

	Programmable as Bus Controller or Remote Terminal or Monitor Terminal
	Up to 4 Dual Redundant MIL-STD-1553B channels
	31 Remote Terminal Controls
	Message formats BC-RT, RT-BC, RT-RT, Broadcast, System Control
	Direct or Transformer coupled

Bus Controller

	64K words of SRAM per channel for DDC controller
	Automatic retries on alternate bus
	Inter-message gap times up to 65.5ms
	Programmable response timeout up to130µs

Remote Terminal

	Programmable command illegalization
	Programmable Single Message or double buffering or circular buffering
	Output drive 1.2VA

Monitor Terminal

	Word monitor per word basis
	Selective message monitor & time stamping
	Dynamic data update
	Message Periodicity
	Bus error status
	Message identifier

Software Support

	Driver and high-level API libraries for Windows XP, Windows 7 and Linux
	Sample applications provided
	Labview drivers are available - Optionally

Physical

Standard CompactPCI card size (160mm x 100mm)

Environmental

	Operating temperature: 0° C to +50° C
	Storage temperature: -20° C to +70° C

Power

	+5 VDC
	Maximum Power Consumption < 20W

Warranty

1 year limited warranty