COTS PRODUCTS > COTS DIGITAL / ANALOG PRODUCTS > MULTI PROTOCOL AVIONICS PRODUCTS > AT-cPCI-MPAC
 
Available on various industry standard & custom bus platforms
UART
  > 1 each of RS-232 / 422 channels (Standard UART)
DIGITAL I/O
> 16 Channel Digital I/O (TTL/CMOS voltage)
MIL-STD-1553B - Optional
  > 1 dual redundant channel
> DDC controller
> Programmable as BC, RT, MT modes
> Direct or Transformer coupled
ARINC429 - Optional
  > 2 ARINC429 controller (4 Transmit / 8 Receive Channels)
> Configurable for High Speed/Low Speed
> Programmable Interrupts
> Software Driver support for a host of operating systems
 

The AT-cPCI-MPAC family of products provides the highest level of performance and flexibility on various hardware interface architectures and custom platforms. It offers an ideal platform for test & evaluation of avionics systems and sub-systems, as MIL-STD-1553B, ARINC429, RS-232, RS-422 and Digital I/O channels are integrated in this card. While the UART and DIO features are provided as standard, the user has a choice of configuring the card to support either MIL-STD- 1553B or ARINC429 or both. The card provides one dual redundant channel of MIL-STD-1553B and 2 ARINC429 controllers. Each ARINC429 controller provides 2Tx and 4Rx channels achieving a maximum of 4 Tx and 8 Rx channels. The MIL-STD-1553B functionality is available with DDC controller and ARINC429 is also available with DDC controller. The AT-cPCI-MPAC is integrated with powerful software that reduces development time. All data bus functionality is supported by our advanced API (Application Programming Interface).

CompactPCI Card

The AT-cPCI-MPAC card meets the compactPCI spec 2.0 Rev 3.0 and are available in both 3U and 6U formats. The cPCI card is available in commercial grade only. Front panel and Rear I/O connectivity options are provided.

I/O Connectivity
UART Channels

The AT-cPCI-MPAC card provides two standard serial UART ports supporting RS-232 and RS-422 interfaces. These are capable of a maximum asynchronous baud rate of 115.2 Kb/s.

Digital I/O Channels

Additional to the serial I/O capabilities, the AT-cPCI-MPAC is equipped with TTL/CMOS level digital I/O channels. It comes with 16 general-purpose digital I/O channels that are pre-configured as 8 inputs and 8 outputs. These can be used to generate an interrupt on any type of level shift event.

MIL-STD-1553B Interface - Optional

The AT-cPCI-MPAC single function MIL-STD-1553B architecture can emulate as a Bus Controller or 31 Remote Terminals or Monitor Terminal modes. Polling and interrupt generation is also provided. The 1553B Channel comes with 64K (DDC) of static RAM.

Transformer and Direct Coupling

The card can be configured to work either in the transformer-coupled mode or in the direct-coupled mode. A jumper is provided on the card to select the mode. It is configured to work in the transformer-coupled mode by default.

ARINC429 Interface - Optional

The card can be configured with up to 2 ARINC429 controllers. Each controller is configured with 2Tx & 4Rx channels and has 128 x 32 bit static RAM. Look-up tables loaded into the RAM enable the module receive circuitry to filter and sort incoming data by label and destination bit. It also provides multilevel data specific interrupts or hardware triggers.

UART
One each of standard serial UART ports supporting RS-232/422 interfaces
Baud Rate - Max 115.2 kbps
Digital I/O Channels
16 digital I/O channels pre-configured as 8 Inputs and 8 Outputs
TTL/CMOS compatible I/O channels
MIL-STD-1553B - Optional
Single channel dual redundant interface
DDC controller
Programmable as BC or RT or MT
64K words of SRAM - DDC controller
31 remote terminal controls
Message formats: BC-RT, RT-BC, RT-RT, Broadcast and System Control
Transformer or Direct coupling options
ARINC429 - Optional
1 or 2 ARINC429 controllers (Each controller 2Tx / 4Rx)
DDC controller
128 x 32 bit Static RAM interface on each ARINC429 controller (2Tx & 4Rx)
Programmable Interrupts
Configurable Bit Format Control
Built-in Fault Detection Circuitry
Wraparound Test for each channel
Software Support
Windows XP, Linux & RT-Linux
Physical
Standard compactPCI card size (160mm x 100mm)
Environmental
Operating Temperature: 0C to +70C
Storage Temperature: -20C to +70C
Warranty
1 year limited warranty
 
CORPORATE   ABOUT   FOLLOW US ON
AdTEC Electronics Inc.
4677 Old Ironsides Drive
Ste 230
Santa Clara, CA 95054
USA
 
AdTEC Electronics specializes in providing end-to-end custom product design & development encompassing System, Mechanical, Board Electronics, Chip design, Firmware and Application Software Engineering. Our design capabilities include design for testability and rugged design to meet both commercial and stringent regulations.
 
HOME ABOUT US COTS PRODUCTS SERVICES & SOLUTIONS SUPPORT & RESOURCES NEWS & EVENTS BLOG CONTACT US
AdTEC Electronics Inc.