COTS PRODUCTS > COTS DIGITAL / ANALOG PRODUCTS > POWER SUPPLY PRODUCTS > MODULE POWER SUPPLY
DC INPUT : 18 to 48V DC

INPUT TRANSIENT PROTECTION


All models meet or exceed (no damage)

MIL-STD-1275A (100V for 50Ms)

MIL-STD-704A & D (80V for 0.1S)

 

AC INPUT UNIVERSAL


100-220VAC, 400Hz Single Phase

Power Factor: 0.99

The Unit operates from AC and DC inputs

Either one or both can be applied at the same time

If both are applied, the AC input is selected

 

DC OUTPUTS (Floating)


Line/Load Regulation Less than 1% (no load to full load)

+/-2% for +15V/2A DC Output

Ripple and noise 50Vp-p, typical (Max. 1%)

Current limiting Continuous protection for unlimited time

Over-voltage OVP and passive Transzorbs on outputs

Over-temperature Shutdown at base plate temperature of + 105 C (+5, -0 C)

Automatic recovery at base plate temperature lower than 90 C

 

EFFICIENCY


75% typical for DC Input

70% typical for AC Input

 

TEMPERATURE


Operation - 40 to + 90 C (base plate)

Storage - 55 to + 125 C

 

EMI/RFI


Meets or exceeds MIL-STD-461D

 

RELIABILITY


150,000 hours, calculated per MIL-STD-217F, AT +85 C base plate, ground fixed

 

ISOLATION


500V between AC input and output

500V between AC input and case

100V between DC input and output

100V between DC input and case

100V between output and case

 

ENVIRONMENTAL


Meets or exceeds MIL-STD-810D


CORPORATE   ABOUT   FOLLOW US ON
AdTEC Electronics Inc.
4677 Old Ironsides Drive
Ste 230
Santa Clara, CA 95054
USA
 
AdTEC Electronics specializes in providing end-to-end custom product design & development encompassing System, Mechanical, Board Electronics, Chip design, Firmware and Application Software Engineering. Our design capabilities include design for testability and rugged design to meet both commercial and stringent regulations.
 
HOME ABOUT US COTS PRODUCTS SERVICES & SOLUTIONS SUPPORT & RESOURCES NEWS & EVENTS BLOG CONTACT US
AdTEC Electronics Inc.